HOW TO: Install the client in MAC OSX
-
- STHS Owner / Propriétaire du STHS
- Posts: 14783
- Joined: Sat Oct 08, 2005 4:18 pm
- Location: Montreal, Canada
- Contact:
Re: HOW TO: Install the client in MAC OSX
Tu dois ouvrir le fichier "simonThockeysimulator.exe" à travers Mono. Moi, j'ouvre une Shell Mono et je tape simonThockeysimulator.exe ensuite.
-SimonT
Forum Administrator / Administrateur du Forum
STHS Owner / Propriètaire du STHS
English V2 & V3 Manual - Manuel V2 & V3 Français
Forum Administrator / Administrateur du Forum
STHS Owner / Propriètaire du STHS
English V2 & V3 Manual - Manuel V2 & V3 Français
-
- New in Town / Le Ptit Nouveau
- Posts: 11
- Joined: Wed Jan 30, 2008 3:26 pm
Re: HOW TO: Install the client in MAC OSX
I get a download error when trying to zip version 2 out. Says unable to expand version 2-1-5 into downloads (error-1 operation not permitted). Any ideas on help?????
Re: HOW TO: Install the client in MAC OSX
I have encountered the same problem.
-
- STHS Owner / Propriétaire du STHS
- Posts: 14783
- Joined: Sat Oct 08, 2005 4:18 pm
- Location: Montreal, Canada
- Contact:
Re: HOW TO: Install the client in MAC OSX
I use Winzip the zip the file. Does Winzip exist on Mac OSX?
-SimonT
Forum Administrator / Administrateur du Forum
STHS Owner / Propriètaire du STHS
English V2 & V3 Manual - Manuel V2 & V3 Français
Forum Administrator / Administrateur du Forum
STHS Owner / Propriètaire du STHS
English V2 & V3 Manual - Manuel V2 & V3 Français
Re: HOW TO: Install the client in MAC OSX
Usually it unzips automatically. I Didn't have a problem with the last 2 versions for Mac at all.
Re: HOW TO: Install the client in MAC OSX
Appears to have been fixed by installing Zipeg.
-
- New in Town / Le Ptit Nouveau
- Posts: 2
- Joined: Fri Nov 30, 2012 10:48 am
Re: HOW TO: Install the client in MAC OSX
I'm running XQuartz 2.7.4 and Mono, I've put both the client file and the STC file in my home folder, opened XQuartz and typed in the command, and I get the following message back:
"The entry point method could not be loaded"
Does anyone know what I'm doing wrong here? Help would be much appreciated!
"The entry point method could not be loaded"
Does anyone know what I'm doing wrong here? Help would be much appreciated!
-
- The Crazy / Le Fou
- Posts: 321
- Joined: Mon Aug 13, 2007 12:03 pm
Re: HOW TO: Install the client in MAC OSX
A GM in my league had the same problem. Any solutions?doctordoak wrote:I'm running XQuartz 2.7.4 and Mono, I've put both the client file and the STC file in my home folder, opened XQuartz and typed in the command, and I get the following message back:
"The entry point method could not be loaded"
Does anyone know what I'm doing wrong here? Help would be much appreciated!
2M4B - online since 2003-2004
http://www.2m4b.com
http://www.2m4b.com
-
- The Addict / Le Drogué
- Posts: 770
- Joined: Mon Aug 14, 2006 5:15 pm
- Location: Vancouver, BC
- Contact:
Re: HOW TO: Install the client in MAC OSX
2.1.5 was ok but 2.1.6 didn't go so well for my MAC client GM. I think he only tried once as far as I know and I think he hasn't since. I'm afraid I might be about to lose him. I didn't want to bother him over the holiday season but I guess I should check soon.
BFHL Admin/Commish
http://www.thebfhl.ca/bfhl
Now in Season 15, using BRHL Player v2.1 Ratings modified.
http://www.thebfhl.ca/bfhl
Now in Season 15, using BRHL Player v2.1 Ratings modified.
Re: HOW TO: Install the client in MAC OSX
I am having the exact same problem... Can anyone help?Marc the Habs Fan wrote:A GM in my league had the same problem. Any solutions?doctordoak wrote:I'm running XQuartz 2.7.4 and Mono, I've put both the client file and the STC file in my home folder, opened XQuartz and typed in the command, and I get the following message back:
"The entry point method could not be loaded"
Does anyone know what I'm doing wrong here? Help would be much appreciated!
Thanks
Re: HOW TO: Install the client in MAC OSX
I will say that people need to ensure they've got the latest XQuartz (which has replaced X11 for those with older Mac OS).
The latest version is 2.7.5 (which was just released today.) http://xquartz.macosforge.org/trac/wiki/X112.7.5
This is especially pertinent if you have updated to Mavericks OS for Mac.
Also - after install you need to log out of your Mac OSX and log back in so it loads properly.
Some of the problems (the "The entry point method could not be loaded" error for example) sound like incompatibility between Visual Basic and Mono. I would ensure that I have the latest versions installed of both mono (http://www.mono-project.com/Main_Page) and VB (http://www.mono-project.com/VisualBasic.NET_support).
Some of our GM's have also had problems unzipping the latest SimonT or XQuartz files etc. Try using KEKA (http://www.kekaosx.com/) as it's up to date and handles all the latest compressions. It's also free.
The latest version is 2.7.5 (which was just released today.) http://xquartz.macosforge.org/trac/wiki/X112.7.5
This is especially pertinent if you have updated to Mavericks OS for Mac.
Also - after install you need to log out of your Mac OSX and log back in so it loads properly.
Some of the problems (the "The entry point method could not be loaded" error for example) sound like incompatibility between Visual Basic and Mono. I would ensure that I have the latest versions installed of both mono (http://www.mono-project.com/Main_Page) and VB (http://www.mono-project.com/VisualBasic.NET_support).
Some of our GM's have also had problems unzipping the latest SimonT or XQuartz files etc. Try using KEKA (http://www.kekaosx.com/) as it's up to date and handles all the latest compressions. It's also free.
Re: HOW TO: Install the client in MAC OSX
opeth771 wrote:I am having the exact same problem... Can anyone help?Marc the Habs Fan wrote:A GM in my league had the same problem. Any solutions?doctordoak wrote:I'm running XQuartz 2.7.4 and Mono, I've put both the client file and the STC file in my home folder, opened XQuartz and typed in the command, and I get the following message back:
"The entry point method could not be loaded"
Does anyone know what I'm doing wrong here? Help would be much appreciated!
Thanks
any solution on this problem?
Re: HOW TO: Install the client in MAC OSX
Hey all, I am getting similar problems to many of my GMs when trying to run this. Are there any other cheap options to buy that are able to run windows based programs on a mac? I saw paralells for 80 dollars. Has anyone tried using this program to run the windows based version of either the client, or the simulator?
Also, is there another paid option out there that people know of that works? Id rather just skip all of this mono and xquartz stuff if there is a cheap enough alternative that is more reliable.
In the meantime, Im also curious does anyone have any new insight on some of the recurring problems mentioned in previous posts? (specifically closter12's post on page 2 of this thread where he copied his error message into his post - this is the same error I am getting)
Also, is there another paid option out there that people know of that works? Id rather just skip all of this mono and xquartz stuff if there is a cheap enough alternative that is more reliable.
In the meantime, Im also curious does anyone have any new insight on some of the recurring problems mentioned in previous posts? (specifically closter12's post on page 2 of this thread where he copied his error message into his post - this is the same error I am getting)
-
- The Addict / Le Drogué
- Posts: 770
- Joined: Mon Aug 14, 2006 5:15 pm
- Location: Vancouver, BC
- Contact:
Re: HOW TO: Install the client in MAC OSX
Any MAC users here or that you know about is working ok with the current version?
In April May 2014, everthing was ok for my MAC GM making a play off run.
Today, got the new files and it's not working for him again
In April May 2014, everthing was ok for my MAC GM making a play off run.
Today, got the new files and it's not working for him again
BFHL Admin/Commish
http://www.thebfhl.ca/bfhl
Now in Season 15, using BRHL Player v2.1 Ratings modified.
http://www.thebfhl.ca/bfhl
Now in Season 15, using BRHL Player v2.1 Ratings modified.
Re: HOW TO: Install the client in MAC OSX
I would also like some direction on using a Mac and the new client.
All of my Mac users are F***ED right now, it's not working for any of them. Some detailed instructions would be helpful.
All of my Mac users are F***ED right now, it's not working for any of them. Some detailed instructions would be helpful.