Pourrais-je savoir que veux dire cette erreur !
Un dg m'a envoyé ce message '' Quand je clique sur Exécuter » en cliquant sur STHS dans mon dossier , ça m’affiche cette phrase : 9-Subscript out of range in Zlib decompress !
Quelqu'un peut m'aider svp ?
J'ai tenté de le trouvé sur le forum mais sans succès .
Merci d'avance
9-Subscript out of range in Zlib decompress
9-Subscript out of range in Zlib decompress
Michael Fleury
-
- STHS Owner / Propriétaire du STHS
- Posts: 14786
- Joined: Sat Oct 08, 2005 4:18 pm
- Location: Montreal, Canada
- Contact:
Re: 9-Subscript out of range in Zlib decompress
Généralement, il manque de mémoire à l'ordinateur. Généralement, le problème arrive sur Windows 98.
-SimonT
Forum Administrator / Administrateur du Forum
STHS Owner / Propriètaire du STHS
English Manual - Manuel Français
Forum Administrator / Administrateur du Forum
STHS Owner / Propriètaire du STHS
English Manual - Manuel Français
Re: 9-Subscript out of range in Zlib decompress
Est-ce que tu parles de mémoire vive , surment pas , car sinon il dit avoir plus de 400 gig de libre sur son disque dur
, et il a windows xp .
Est-ce le même problème que tu pensais ou bien c'est autre chose ?
, et il a windows xp .
Est-ce le même problème que tu pensais ou bien c'est autre chose ?
Michael Fleury
-
- STHS Owner / Propriétaire du STHS
- Posts: 14786
- Joined: Sat Oct 08, 2005 4:18 pm
- Location: Montreal, Canada
- Contact:
Re: 9-Subscript out of range in Zlib decompress
Alors je lui reconseille de réinstaller les STHS Support files.
-SimonT
Forum Administrator / Administrateur du Forum
STHS Owner / Propriètaire du STHS
English Manual - Manuel Français
Forum Administrator / Administrateur du Forum
STHS Owner / Propriètaire du STHS
English Manual - Manuel Français
Re: 9-Subscript out of range in Zlib decompress
400 gig sa c'est son disque dur, il a combien de ram ?mikannick wrote:Est-ce que tu parles de mémoire vive , surment pas , car sinon il dit avoir plus de 400 gig de libre sur son disque dur
, et il a windows xp .
Est-ce le même problème que tu pensais ou bien c'est autre chose ?
Re: 9-Subscript out of range in Zlib decompress
Merci pour tout , le problème ne semble pas se règler mais
par chance , on a été capable de d'installer le tout sur vista
et ça marche , alors merci les gars.
par chance , on a été capable de d'installer le tout sur vista
et ça marche , alors merci les gars.
Michael Fleury
Re: 9-Subscript out of range in Zlib decompress
Je résolu le problèm sur mon ordinateur et je voulez juste laisser une note pour tous les autres qui la rencontrent. Dans mon cas, le problème était un de les fische de lignes de GM. Un des fisches de ligue était de 0 kb. L'élimination de cette ligne a résolu le problème. Espérez que ceci aide n'importe qui dans une situation semblable.
My apologies if the above was not well phrased. I used a google translator to translate the above for my fellow french Gm's out there. To recap for the English Gm's out there;
I had the same problem. The problem ended up being one of the Gm lines files. One of the files one of the Gm's uploaded happened to be 0 kb, probably from an incomplete upload. Turns out that file was causing the problem. I can't say that this causes the error in every case, but it did in mine. If you experience this error, check your lines folder and see if there are any lines files that are not the right size (or failing that, try deleting all the lines files from the lines folders and seeing if it works, indicating one of the lines is causing the error).
Hope this helps someone else who encounters the problem. Cheers.
My apologies if the above was not well phrased. I used a google translator to translate the above for my fellow french Gm's out there. To recap for the English Gm's out there;
I had the same problem. The problem ended up being one of the Gm lines files. One of the files one of the Gm's uploaded happened to be 0 kb, probably from an incomplete upload. Turns out that file was causing the problem. I can't say that this causes the error in every case, but it did in mine. If you experience this error, check your lines folder and see if there are any lines files that are not the right size (or failing that, try deleting all the lines files from the lines folders and seeing if it works, indicating one of the lines is causing the error).
Hope this helps someone else who encounters the problem. Cheers.
Re: 9-Subscript out of range in Zlib decompress
I had the same issue and mine also turned out to be a line file someone uploaded that was a 0kb file.